#Harris micromax exciter problems full

MonitorВ вЂ“ access to monitoring only, with no ability to control any part of the transmitterДЄnd eCDi provides peace of mind.

#Harris micromax exciter problems full

OperatorВ вЂ“ full access to all monitoring, plus access to only routine transmitter control areas.

EngineerВ вЂ“ full access to all monitoring and control of the transmitter.

It offers three password-protected access levels to provide the: Housed in an easy-to-install, single-rack-unit assembly, eCDi provides full monitoring and control of all transmitter elements, including power amplifier status, output monitoring, cooling system monitoring and control, control system diagnostics, RF system mode control, and for digital television transmitters, RTAC control and monitoring.Д®CDi is versatile. eCDi is also fully compatible with network managers such as Harris CCS Pilot and Navigator. The eCDi enhanced transmitter network monitoring and control system is a unique hardware/software package that enables operators of remote transmitters вЂ“ or multiple stations or transmitters вЂ“ to monitor, control and measure transmitter performance from a network computer or web-enabled mobile phone. A dry contact closure rated at 24 VDC 0.5 amp is all that is necessary for remote operation.Д®nhanced Transmitter Network Monitoring and Control

Control voltage is 24 VDC provided by the transfer switch. Remote control connections are also provided via a terminal strip. A terminal strip allows for connection to 208/240 VAC, 50/60 Hz operational voltage. The HS-4P is installed in analuminum enclosure with interlocked removable panel for safety.Д¬ontrol is provided by an extended 19 in.В rack panel (9 conductors required) with pushbuttons and indicator lights to show switch position. The transfer time is less than 0.5 seconds. This Main/Aux Switch design is based on the highly reliable Harris HS-4P RF motorized contactor eliminating the high impact solenoids used in conventional designs. If a test load is available, interlocks can be wired to permit the non-air transmitter to be operated into the test load.

It is a 4-port unit which can handle two transmitters, one test load and one antenna system. It may be used to switch either transmitter to the station antenna system or test load (optional). TheВ HarrisВ® Motorized Coax Switch is designed for use as a main and auxiliary transmitter transfer switch. Motorized Transfer Switch for AM Transmitters